Locator Training
Locator Training for Radiodetection MRX, RD7200 & RD8200
Hands-on cable & pipe locator training for contractors, utilities and councils. Learn best-practice locating, risk reduction and BYDA-aligned workflows using Radiodetection MRX, RD7200 and RD8200 equipment. Delivered by Testrix experts in Australia.
Who this training is for
Contractors & Civil
Safe excavation teams needing reliable pre-dig checks, strike reduction, and better documentation.
Utilities & Councils
Water, power, gas, comms and municipal crews who must standardise locating across shifts and sites.
Service Locators
Professional locators seeking workflow speed, accuracy, and confident use of RD8200 features.
You’ll get more from this course if you already own or plan to purchase MRX, RD7200 or RD8200 equipment.
Learning outcomes
- Understand EM locating principles & frequency selection
- Confidently use MRX / RD7200 / RD8200 locate modes
- Active vs passive methods; induction, direct connect, and clamps
- Trace quality improvement & interference avoidance
- Depth, current, and signal confidence checks
- Mark-out standards and site documentation basics
- Risk reduction techniques to avoid cable strikes
- Intro to GPS/data logging (RD8200) for auditability
This course aligns with BYDA best practice workflows. It is not a BYDA certification, but prepares teams to operate competently and safely.
Course outline
Module 1 — Fundamentals
- How EM locators work (cables vs pipes; conductors vs ferrous)
- Frequencies, gain, filters & when to use them
- Passive power/radio vs active tracing
Module 2 — Equipment & Setup
- MRX / RD7200 / RD8200 controls & modes
- TX transmitters, clamps, leads, A-frames, sondes
- Induction vs direct connection, safety considerations
Module 3 — Field Techniques
- Starting a trace, verifying identity, overcoming congestion
- Depth/current checks & error avoidance
- Locating tees, joints, dead-ends and non-metallic runs
Module 4 — Advanced (RD8200)
- GPS, logging & creating basic audit trails
- Centimetre-level workflows (when paired with survey-grade GNSS)
- Data hygiene & project records
Module 5 — BYDA-Aligned Workflow
- Pre-dig checks, plans & risk controls
- Mark-out conventions & as-found documentation
- Scope limits & escalation
Module 6 — Practical Assessment
- Real-world locating exercises on site
- Feedback and skills coaching
- Action plan for continuous improvement
Delivery formats & pricing
| Format | Duration | Group Size | Indicative Price (ex GST) |
|---|---|---|---|
| On-site Team Training | 1 day (7 hours) | Up to 8 | $2,250 |
| Public Course (Scheduled) | 1 day | Up to 10 | $495 per person |
| Advanced RD8200 Workshop | 1/2 day | Up to 6 | $1,350 |
Pricing is indicative and may vary by location, site access, and equipment requirements. Travel costs may apply outside metro areas.
What’s included
Delivered by a locator specialist with extensive field experience.
Real equipment: MRX, RD7200, RD8200, TX transmitters & accessories.
Quick-reference guides & post-course checklist.
Equipment can be provided if you don’t have your own on the day. Please advise during booking.
Why train with Testrix
- Brand expertise: Deep knowledge of Radiodetection MRX, RD7200 & RD8200 systems.
- Australian conditions: Techniques tailored for local utilities and work practices.
- Outcome-driven: Safer digs, fewer strikes, and faster, clearer mark-outs.
- Aftercare: Advice on accessories & upgrades (see accessories).
Related equipment
Build your toolkit:
MRX (BYDA) RD7200 RD8200 CAT4+ TX Transmitters & Accessories Utility Locators Underground Locators
What participants say
“Clear, practical training. Our strike risk has dropped and mark-outs are faster.”
“We finally understood frequency choices and interference. The RD8200 data tips were gold.”
Ready to book?
Tell us your preferred dates, location and equipment. We’ll confirm availability and provide a tailored proposal.
Frequently asked questions
Is this a BYDA certification?
No. This course is BYDA-aligned and prepares teams to operate to best practice, but it is not an official BYDA certification.
Do we need our own equipment?
Bringing your own MRX, RD7200 or RD8200 is ideal. We can supply equipment if needed—let us know when booking.
Where do you run the training?
We deliver on-site across Australia and offer scheduled public courses in major centres. Enquire for upcoming dates.
How many people per session?
Best results with up to 8 participants for a 1-day session. We can tailor larger groups—ask us for a proposal.
Will we cover GPS and data logging?
Yes—if you’re using the RD8200G, RD8200SG or MRXG and MRXSG we include GPS/logging workflows and basic audit trails.
This category is empty! Please try another category or use our search function to find what you are looking for. If you require further assistance please contact us.
